Follow the instructions in the message window. The touchpad board is glued to the upper case, only remove the touchpad board if it is defective. Remove the left and right antenna cables together with the tapes holding them in place. Removing the Back Cover” on page M2xL3 1 Silver 1.
|Date Added:||7 April 2012|
|File Size:||64.17 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Removing the WLAN Modules – Acer Aspire G ZG Z G
Removing the Back Cover” on page Please also refer to Chapter 4 Troubleshooting when problem arises. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines. Susanne Where to connect the black and white wires in acer laptop?
Removing the LCD Module” on page Boot from the diagnostics diskette and start the diagnostics program.
RTC battery has been highlighted with the yellow circle as shown in the figure above. Show only see all. Removing the Keyboard” on page Release the latch and disconnect the fingerprint cable from FPCN1 connector on the main board. Removing the SD Dummy Card” on page The touchpad board is glued to the upper case, only remove the touchpad board if it is defective.
The web camera module is glued to the LCD module back cover, only remove the web camera module if it is defective. Main Unit Disassembly Flowchart.
There are two version of aceg module. The black antenna cable is connected to the connector 1, the White antenna cable is connected to connector 2 and the Gray antenna cable is connected to connector 3.
Removing the LCD Brackets 1. By default, vertical and horizontal scrolling is enabled on your touchpad. When connecting the cable back to the unit, please note that the cable should be routed well.
The Black antenna cable is connected to the connector J2 and the Gray antenna cable is connected to connector J3. Disconnect the blue antenna cable from the auxiliary connector and disconnect the yellow antenna cable from the main connector on the WLAN board for 3G model.
Removing the Middle Cover” on page Get My Free Ebook. Help for parameters are found in the Item Specific Help part of the screen. Remove the one screw C securing the locker bracket and remove the locker bracket from the optical disk drive module.
Acer Aspire 5738Z, 5738ZG Notebook WinXP, Vista, Win7 Driver, Utility
Scroll Lock does not work with some applications. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. Disclaimer The information in this guide is subject to change without notice.
Remove the one screw F securing the short wireless board module to the system. Remove or disconnect all of the following devices: Remove the left and right antenna cables together with the tapes holding them in place. Priamus How to install wifi card acer z?